Garage Door Spring Repair in Lakewood

Garage door springs rarely give you a heads-up before they fail. One day, the door moves smoothly. The next, it won’t budge or it slams shut with force. Springs carry the full weight of the door, and when they snap, you’re left with a safety risk and a daily hassle. Getting the right help quickly makes all the difference for homeowners in Lakewood.

How We Spot a Broken Spring Before It Gets Worse

Sometimes, the warning signs show up before the spring actually breaks. Maybe the door feels heavier, or you hear odd noises as it moves. Other times, the door won’t open fully or drops too fast. These aren’t just quirks—they’re clear signs the spring is on its last legs or already broken.

Door Won't Open or Lift: The opener hums, but the door barely moves or stays put.
Loud Bang or Snap: A sharp, sudden noise from the garage that sounds like something serious just happened.
Visible Gap in the Spring: A clear break or separation in the coil above the door.
Door Drops Fast When Closing: The door slams down instead of closing smoothly.
Crooked or Uneven Movement: One side rises higher, leaving the door tilted and unstable.

Trying to force a door with a broken spring only makes things worse. The opener strains, and the risk of the door falling jumps. We’ve seen what happens when people try to muscle through—bigger repairs and more headaches. The safest move is to stop using the door and let a pro handle it.

Why Springs Fail and How We Address It

With every open and close, springs inch closer to the end of their lifespan. Most are rated for a set number of cycles, and frequent use burns through those quickly. Over time, the metal weakens and finally gives out. Rust speeds up the process, especially when moisture lingers in the air. Once corrosion sets in, the spring stiffens and loses its ability to flex. Cold snaps don’t help. Metal contracts, and brittle springs snap under pressure. Lakewood’s changing seasons only add to the wear.

Skipping maintenance shortens a spring’s life. Without occasional lubrication, friction builds and the metal wears down faster. Sometimes, the wrong spring gets installed. Too weak for the door’s weight, and that’s a shortcut to early failure. We check for all these issues, making sure the replacement matches your door’s needs and stands up to daily use.

Matching the Right Spring to Your Door

Every garage door needs a spring that fits its size and weight. Torsion springs sit above the door and twist to lift heavier loads. Extension springs run along the sides and stretch as the door moves. The right choice depends on your door’s build and how often you use it.

Torsion Springs: Positioned above the door, these handle heavier doors and offer longer service life with proper care.
Extension Springs: Run along the tracks, best for lighter doors and smaller garages.
High-Cycle Springs: Designed for frequent use, these last longer than standard options.
Galvanized or Coated Springs: Treated to resist rust, ideal for homes where moisture is a concern.

We measure your door and review the current setup before recommending a spring. Using the right type means smoother operation and fewer problems down the line. Retrak Door Service always matches the spring to your door’s exact requirements, so you’re not facing the same issue again in a few months.

What You Gain When We Replace Your Spring

When a new spring goes in, the door regains its balance and moves the way it should. The opener no longer struggles, and the whole system runs quieter and smoother. You’ll notice the door lifts evenly, closes gently, and doesn’t jerk or stall. That’s not just convenience. It’s peace of mind.

Safety improves, too. A balanced door won’t drop without warning or put extra stress on cables and tracks. That means less risk to your car, tools, or anyone nearby. We’ve handled plenty of calls where a broken spring led to bigger damage, all because the repair was delayed. Getting the spring replaced on time keeps everything else in good shape for Lakewood residents.

Why We Advise Against Using a Door with a Broken Spring

Operating a garage door with a broken spring is a gamble. The door can fall suddenly, and with its weight, that’s a real hazard for people and property. The opener isn’t built to lift the full load, so it strains and often fails. We’ve seen motors burn out and doors get stuck halfway, all because the spring was left broken.

Other parts take a hit, too. Unbalanced doors put uneven pressure on cables, tracks, and rollers. Cables snap, tracks bend, and rollers wear out faster. What starts as a spring problem quickly turns into a bigger, more expensive repair. The best move is to stop using the door and let us handle the fix before more parts get damaged.

How We Handle Emergency Spring Repairs

Springs never pick a convenient time to break. Early mornings, late nights, or weekends, when you need your car or want to close up for the night, that’s when trouble hits. We keep our trucks stocked with the most common spring sizes, so we’re ready to handle repairs on the spot. No waiting for parts, no leaving your car trapped inside.

After the repair, we clean up and check the door for any other issues. No mess left behind, just a door that works the way it should. When you call for emergency spring repair, you get a team that shows up prepared and gets the job done right in Lakewood and nearby areas.

Let's Get Your Door Working Again

A broken spring doesn't fix itself, and waiting only makes things worse. Call Retrak Door Service at 303-902-8840 or book an appointment to schedule your repair.